B&E’s Midstream Group is led by a proven management team with deep experience and a strong reputation for delivering the results that our world-class customers expect from us. We design, engineer, fabricate, install, and commission a wide range of upstream & midstream production and processing equipment including (but not limited to):
- Gas Dehydration Units (5 MMscfd – 200 MMscfd)
- Crude & NGL Stabilizers (1000 BPD – 25,000 BPD)
- Gas Production Units (GPU), Enclosed & Non-Enclosed
- Wellhead Test/Metering Allocation Skids
- JT / Dew Point Control Skids
- Heater Treaters & Heated Separators
- High Capacity Dual & Triple Blow Case Skids
- Gas Filter Separators & Coalescing Filters
- Fuel Gas Conditioning Skids
- Vertical & Horizontal Separators & Slug Catchers
- Header Skids
- Other Custom Skid-Mounted Modular Production/Process Equipment
We also provide the following capabilities and services to our clients:
Capital and Maintenance Projects
Our vast experience at B&E Resources has allowed us to engage in a broad variety of projects for multiple industries. Our background, alliances and skill-sets permit us to be your ‘go-to’ partner on projects of virtually any size. We have managed a wide range of projects, both brown-field and green-field, from small capacity extensions, retrofits and maintenance upgrades to large new-build gathering and processing facilities. We know how to handle your project. With extensive planning expertise and systems to identify the critical path and guide through the project stages, we can help you meet tight schedules, maintain budgets, and expedite schedules on large projects through innovation, communication and a proven execution strategy.
Our response time is exceptional. In addition to extended two-shift fabrication shop hours, our construction and maintenance crews are available to perform on short notice, 24/7, as a prime responder to answer your needs.
Engineering, Procurement and Construction (EPC)
B&E Resources has the in-house personnel and long-standing engineering relationships to offer complete EPC project capability. We partner with our clients to develop unique facility designs and develop economical solutions through front-end engineering design studies (FEED), then support them all the way through start-up and commissioning. With our expertise in packaged equipment design and fabrication, we can provide cost efficient alternatives to traditional ‘stick built’ facilities. With our approach, you will minimize field construction durations while maintaining the highest level of quality with our shop-built equipment; ultimately reducing your project’s total installed cost (TIC). We offer:
- Comprehensive Project Management
- Interactive Engineering Design Efforts (Full 3D Modeling)
- Integration with In-House Fabrication
- Robust Project Controls
- Bidder Qualification and Contracting
- All Necessary Construction Disciplines
- Constructability Reviews
- Construction Management
- Health, Safety, & Environmental (HSE) Department
- QA/QC
- Logistics and Equipment Transportation
- Operator Training and Support
Civil Construction
B&E offers proven civil construction capabilities to take an unfinished site to a finished facility. We have the experience and the skilled tradesmen to accomplish the work efficiently, safely and cost effectively, adhering to all industry standards. Our services include:
- Site Preparation / Grading & Levelling
- Excavating
- Road Construction
- Underground Drainage Systems
- Demolition
- Demobilization & Re-mobilization of Modular Plants & Equipment
- Concrete Foundations & Drilled Piers
- Screw Pilings
- Tank Rings and Holding Ponds
Structural, Mechanical and Piping (SMP)
B&E Resources can take structural, mechanical and piping components of a midstream capital or maintenance project from the drawing board through installation. We have 3D CAD design and modeling capability to avoid clashes and construction anomalies. Our structural steel facilities have high hook heights to 40 feet, heavy-lift cranes to 40-ton, and sizeable laydown yard capacity to accommodate virtually any fabricated structure. We can provide products from a wide selection of materials with complete traceability and quality control with 100 percent inspections. Our ASME Coded fabrication facilities have the qualified craftsmen – designers, fitters, welders, fabricators, and inspectors – to assure that your piping is delivered as expected, either spooled or in customized individual sections. We carry the ASME “PP” stamp and have the qualifications to work with virtually all grades of pipe and materials, in sizes ranging from 2-inch through 60-inch and beyond, designed for high and low temperature applications. Our field construction and maintenance capabilities perfectly complement our fabrication expertise for a complete project solution as your sole-source partner. We offer:
- Process Piping Fabrication & Installation
- Special Metals / Alloy Welding Shop (Stainless Steel, Inconel, etc.)
- Structural steel erection and dismantling
- Scaffolding, Walk-ways, Platforms
- Pipe Rack Construction
- Pipe Insulating and Testing
- Storage Tank Repairs
- Carbon Steel Shops
- Small and large bore
- Thick and Thin wall piping
- High and low temperature piping
- On-site hydro, NDE and PMI
Electrical & Instrumentation (E&I)
We have gained an industry following for our electrical and instrumentation capabilities. We employ certified and licensed electricians and highly qualified instrument technicians to address your most demanding and intricate requirements, whether new installations or field maintenance and repairs. We provide:
- Texas electrical contractor #29783
- Louisiana electrical contractor #42115
- Duct-bank construction
- High voltage terminations
- Tubing installation
- Commissioning and startup
- Fire and gas detection systems
- Instrument/control system installations
- Raceway, cable tray & conduit installation
- Heat tracing
- Electric control panel fabrication
- SCADA and automation
Packaged Equipment
At B&E Resources, we have a reputation for producing high quality, fit-for-purpose equipment packages. Our in-house engineering team can create custom skid packages uniquely designed to meet customer specifications or we can leverage our standard design equipment for speed-to-market applications. We offer the complete project from process design, engineering, fabrication, I&E, testing, shipping, and start-up & commissioning. Our capabilities include:
- Gas Dehydration Units (5 MMscfd – 200 MMscfd)
- Crude & NGL Stabilizers (1000 BPD – 25,000 BPD)
- Gas Production Units (GPU), Enclosed & Non-Enclosed
- Wellhead Test/Metering Allocation Skids
- JT / Dew Point Control Skids
- Heater Treaters & Heated Separators
- High Capacity Dual & Triple Blow Case Skids
- Gas Filter Separators & Coalescing Filters
- Fuel Gas Conditioning Skids
- Vertical & Horizontal Separators & Slug Catchers
- Header Skids
- Other Custom Skid-Mounted Modular Production/Process Equipment
Equipment Installation
B&E has proven, high quality fabrication capabilities that create large equipment and modular pieces for field installation. Our experienced installation and construction personnel make certain that, regardless of size, equipment is transported and installed correctly. Our logistics teams have planned, conducted route studies and arranged transportation for single units as large as 100 feet long, 19 feet high and 25 feet in width. Among our equipment installed include:
- Custom fabricated structures
- Tanks and pressure vessels
- High and low pressure piping
- Heavy structural components
- Skid installation and hookup
- Drilling packages and platforms
- Process equipment
- Storage tanks
Vessels, Tanks and Separators
Since our inception, B&E resources has been manufacturing and repairing custom vessels, tanks and separators for the oil and gas industry. Our high pressure vessels conform to ASME Section VIII, Div. 1. We can create either horizontal or vertical vessels, free-standing or skidded, designed in-house or to your specifications. We also hold ASME “U” and NBIC “R” stamps. Size is not a factor. We have provided logistics and overland transport for large vessels and structures as long as 100 feet. Along with the vessels and tanks, we provide the necessary attachments – flanges, piping, skids, stands ladders and valves. Among our products are:
- Pressure vessels
- Storage tanks
- Mud/gas separators
- Skidded systems
- Low pressure bulk storage tanks
- Non-code vessels
- H2S certified separators
Modularization
B&E Resources is highly experienced with modularization, completing projects that were manufactured in a controlled environment, readily shipped and installed. Our deliverables greatly reduce or eliminate the complexities of field erection methods while controlling manufacture and assembly. The result is efficiency, cost containment, schedule improvement and perfect fit-up without rework.
Industrial Coatings
B&E Resources have 8,000 square-foot paint and sand blasting facilities at two locations to provide quick project turnaround without bottlenecks. We assure the preparation of the materials prior to coating with the application of 2 and 3 stage epoxy industrial coatings with urethane finish. We have inspections at each stage of the process, assuring the highest QA/QC possible and suitability to the end use service conditions. Our mil thickness test reporting ensures consistent applications and we conform to NACE standards to deliver high quality end use products.
Machined Parts
B&E Resources has a complete machine shop capability to support a full range of solutions for our midstream clients.
Equipment Start-up, Commissioning and Warranty Service
B&E’s Midstream Group has a field service team ready to support the start-up, commissioning and warranty service expectations of our midstream clients.
